QUICK TIP: If your computer is directly connected to the modem and is experiencing limited or no connectivity, you may need to contact your ISP to check if there’s any problem with the network. To learn how to resolve this, click here. IP Address conflict happens when two computers on the network have the same IP Address. Verify that your computer gets a unique and valid IP Address from the modem or router. Ĭheck if you have an IP Address conflict with another device Also check if the computer is set to Obtain an IP Address automatically. Įnsure that your adapter is working properlyĭisable and enable your network adapter to make sure that it is functioning. For more information on how to resolve this issue, click here. If the Power LED on your Linksys router is blinking, it means the firmware is corrupted. NOTE: A lit Ethernet LED indicates a working cable and proper connectivity. You can also try connecting the Ethernet cable to another port of the router to test.
Sometimes, the solution might be as simple as restarting the modem / router, then your computer. If you are using a switch, modem, or router on your network, make sure that they are connected properly then switched ON.
